Krypt HLCD speakers are the most advanced wakeboard tower speakers available today. We designed our speakers with pro audio loudspeaker technology, and converted it to what customers demand on wakeboard towers. Traditionally car audio speakers are installed on wakeboard towers, but they are not designed to be heard more than 5’ – 10’ from the speakers max. Krypt HLCD speakers are designed to push clean and clear volume out 80’ and beyond. How did we do this? We built our speakers with the same loudspeaker technologies that are used at concerts and other large events. Fire these speakers up with the RMS power rating, and they are 3 to 4 times louder than any car audio speakers available.
 
Krypt HLCD speakers have a molded PVC cone with rubber surrounds to withstand extreme environments (marine grade). Kapton Voice Coils and Ferrite Magnets allow our speakers to handle lots of power and withstand long periods of high heat. A 2” Horn Loaded Compression Driver (HLCD) is mounted to the rear of the magnet, and the sound is fired through a coaxially mounted flare for maximum sound distance. All frequencies are pushed to the speaker through a provided crossover.
 
Included: 1 Pair of speakers, 1 pair of grills, and 1 pair of crossovers.
 
Krypt 8" HLCD will mount in our Krypt 8" speaker cans
 
Specifications
 
Model
   
Krypt 8" HLCD
Nominal Diameter
   
8 inch
Nominal Impedance
   
 4 ohm
RMS Power
   
180 Watts
Peak Power
   
360 Watts
Sensitivity (1w/1m)
   
93 dB
Frequency  range
   
60 - 20K  Hz
Voice  coil  diameter
   
49.55 mm
Magnet  dimension
   
135x20 mm
Fs
   
60  Hz
Re(D.C.)
   
3.3  ohm
Basket
   
Powder Coated Steel
Cone and dust cap
   
Black PVC
surround
   
Rubber  (PU)
Voice coil wire
   
EISV
Voice coil bobbin
   
Kapton
Magnet
   
Ferrite
Over all diameter
   
196mm
Bolt circle diameter
   
176mm  / 4 - 4.3 holes 
Cut out diameter
   
159 mm
Depth
   
142  mm
Tweeter
   
2”driver