Bob LaPoint Design Variable Concave Design 5-Stage Rockerline Fat Tail Geometry 100% Carbon Fiber Reinforcements Torsional Carbon Construction Polyvinyl Chloride Foam Core Syndicate Adjustable Fin Block Handmade in the U.S.A. Rider Weight 67.5 inch 180lbs and above 32-36 MPH Will Asher's Recommended Syndicate A2 Fin Settings: Length: 6.845 (Tips) Depth: 2.505 Distance from Tail: 0.780 Wing Angle: 8 Degrees The Syndicate A1 evolved, its design refined over two seasons of professional and amateur tournament domination. The Syndicate A2 employs all new Variable Concave Technology providing maximum speed and angle with safety to match. Traditional skis use one concave radius along their entire length. With the A2 this concave radius changes: larger radius and shallower concave depth in the tail for increased speed, smaller radius and deeper concave depth under the boots for maximum angle creation and back to a larger radius in the tip to keep the front of the ski up and moving without excess tip bite. Larger radii create lift fore and aft of the boot region and act as an Auto-Centering safety for the skier. When too far back at the finish of the turn, the increased tail lift helps to drive the ski tip down thereby allowing the skier to accelerate sooner off the buoy and stay in the pass. When the skier climbs over the front of the ski at the finish of the turn increased tip lift allows the ski to continue to move through the finish of the turn without stopping or overturning due to excess tip bite. Feel the difference on the water and ride what champions ride.