Cuda Wakeboard Tower

The Cuda Tower is a brand new radical forward swept design that is fresh out of the Big Air R&D department. Why compromise by paying $5,000 to $10,000 for a factory tower when the Cuda gives you a better look and quality.  It has all the style you want with ultra-polished finish, and universal mounts.  The Cuda Tower has a forward sweeping design that is incredibly rigid for a stable pull behind the boat and makes your boat look better than anything else on water.

Tired of hitting your head on low height towers…Not with the Cuda.  The average tower height when mounted is approximately 7 feet (with standard 2 feet gunnels). Yeah...that’s right, 7 FEET!  This allows you install speakers and biminis without all the clearance issue other towers have. 

The Cuda Tower can accommodate any boat between 72" and 103" width, for a truly universal design that will fit almost any boat on the market. If your boat is either narrower (60"-72") or wider (103"-110") than these widths, please contact us for some possible fitting options. The Cuda Tower quickly and easily collapses for convenient storage in a standard garage.

Fits most boats from 72"-103" wide (Contact us for options if your width is narrower or wider)
Polished or Black powder coat finish options
Forward swept tower - can be reverse mounted if desired
High quality 6061-T6 aluminum tubing results in a strong tower that is lightweight
2.25" large diameter - flex reducing aluminum tubing
Telescoping top section makes installation easy on any boat
Built in mounts to quickly accept our Razor Series rack line with 1 simple stainless steel fastener
The Cuda tower has built in corner trusses ensure a rigid structure for rough water and roads
The Cuda tower can mount on the side or on top of boat gunnels
Tower stands roughly 5 feet from mounting points with a 12 degree inward taper
Secure design creates for a silent tower that will not rattle, creak or moan in rough water
Designed with finite element analysis structures to reduce tower flexure
Swivel rope head to offer free rope movement
The Cuda tower collapses in just minutes
26" height above gunnel when collapsed
5 year warranty
Mounting hardware and backing plates are included
Large aluminum backer plates included to give your hull the support it needs
Single bolt mounts minimizes the amount drilling through your hull
Incredibly easy to install (typically 3 to 6 hours) at home or by your Big Air dealer
Navigation light capable
Pre-drilled for ease of wiring installation
The front to back stance on the Cuda tower is 39"

 NOTE - If your hull is thinner than 3/8" thick then we recommend you reinforce the fiberglass with a Big Air Hull reinforcement kit for tower installation.

Aluminum Kit includes four 3/16-inch thick flat sheet aluminum cut to 6x9 inches. The reinforcement plates mount inside your hull in the tower mount area to provide necessary stability to your hull so as to reduce chances of fiberglass damage. The advantage of aluminum vs. plywood is that the aluminum can be shaped to conform to your hull.

Plywood Kit includes four 1/2-inch thick marine grade plywood cut to 5x9 inches. The reinforcement plates mount inside your hull in the tower mount area to provide necessary stability to your hull so as to reduce chances of fiberglass damage.

OnlyInboards Take - We love that this tower can be mounted forward or backwards which is unlike most towers on the market.  We think this tower looks great both ways and have not heard anything but great reviews on them.  We would not hesitate to put this on our own boat.