Please measure your wakeboard   tower following the simple  instructions below so you know what size of    Cargo Rack Bimini you  need.  This bimini top fits virtually all   wakeboard towers.

1) The frame of the Cargo Rack Bimini mounts between the legs  of the   tower.  Determine which is narrower:  the space between the  two rear   legs on your tower or the space between the two front legs.   The   narrower of the two will determine the width of the bimini that  can be   fit between them.
 

2) Take the following measurement between the legs that have the   narrower space.  The distances measured need not be exact. 

    a)  If you have accessories such as speakers hanging from  the top   of the tower, measure the inside width of the tower 4” to 6”  below   those accessories as shown below.  How far down you measure  impacts the   available headroom and clearance for wakeboards or  infltables stored on   top of the bimini top.

     b) If you have no hanging   accessories, measure the  inside width 5” to 10” from the bottom of the   top section of the  tower:  How far down you measure impacts the   available headroom and  clearance for wakeboards or infltables.

Size Options

Once you have this width   measurement, you can determine the bimini size that you need.

If your measurement is a little less than 65”, then it may be  better   to get the medium bimini and mount it a little farther down  the legs.    However, this will reduce headroom.  Although headroom is  essential,   some headroom can be sacrificed for the additional shade of  a wider   bimini.  The width of the bimini canvas is close to the lower  end of   each measurement range.  The remainder of the width is  compensated by   telescoping members that do not provide shade coverage  for the gap   between the tower and bimini.